駿弘電器維修

【解決方案】定時失效多為面板控制板故障、按鍵老化或線路接觸不良，我們會更換全新控制板，校準定時系統，恢復正常定時功能。

【Solution】Timer failure is mostly caused by control panel malfunction, key aging or poor circuit contact. We will replace the new control panel, calibrate the timer system and restore normal function.

【解決方案】主要原因為溫度感應器故障、主板程式異常或繼電器損壞，更換原廠感應器及維修主板，恢復自動跳保溫功能。

【Solution】Main causes are temperature sensor failure, mainboard program error or relay damage. Replace original sensor and repair mainboard to restore automatic keep warm function.

【解決方案】保溫溫度過高/過低均為保溫加熱盤或感應器老化，更換原廠配件，調校保溫溫度參數，恢復標準保溫模式。

【Solution】Abnormal temperature is caused by aging heating plate or sensor. Replace original parts, adjust temperature parameters to restore standard keep warm mode.

【解決方案】面板不亮多為電源板故障、保險絲燒毀或顯示屏損壞，檢修電源系統，更換故障組件，恢復面板顯示。

【Solution】Caused by power board failure, fuse burnout or display damage. Inspect power system, replace faulty components to restore panel display.

【解決方案】液晶黑屏為顯示屏本體損壞或連接線鬆脫，更換原廠液晶面板，重新連接排線，修復顯示功能。

【Solution】Caused by LCD damage or loose cable. Replace original LCD panel, reconnect cables to restore display function.

【解決方案】按鍵內部彈片老化、進水氧化導致失靈，更換全新按鍵模組，清潔面板線路，恢復所有按鍵功能。

【Solution】Caused by aging key spring or water oxidation. Replace key module, clean panel circuit to restore all key functions.

【解決方案】C1/C2為溫度感應器異常，C5為壓力開關故障，CP為主板通訊錯誤，專業檢測對應故障組件並更換原廠配件。

【Solution】C1/C2: Temperature sensor error; C5: Pressure switch failure; CP: Mainboard communication error. Professional inspection and replacement of original parts.

【解決方案】電源線接觸不良、主板過熱保護、加熱盤故障導致中斷，全面檢修電源及加熱系統，穩定運作。

【Solution】Caused by poor power contact, mainboard overheat protection or heating plate failure. Comprehensive inspection and repair to ensure stable operation.

【解決方案】更換全新原廠密封膠圈，調校內蓋扣合角度，徹底解決漏蒸氣問題，恢復壓力煮飯效果。

【Solution】Replace original seal ring, adjust inner lid angle to completely solve steam leakage and restore pressure cooking.

【解決方案】深度清潔排氣孔系統；感應器故障直接更換原廠配件；主板故障進行晶片級維修或更換，徹底解決所有核心故障。

【Solution】Deep clean ventilation system; replace original sensor; chip-level repair or replacement of mainboard to solve all core failures.