German Home 電磁爐維修 German Home Induction Cooker Repair

故障原因： 1. 電源線老化或破損導致漏電
2. 內部電路板短路
3. 接地線接觸不良
4. 加熱線圈絕緣層損壞

Fault Causes： 1. Aging or damaged power cord causing leakage
2. Internal circuit board short circuit
3. Poor grounding wire contact
4. Damaged insulation layer of heating coil

解決方案： 1. 立即停止使用，避免觸電危險
2. 專業技師上門檢測漏電點
3. 更換損壞的電源線或電路板
4. 重新接駁接地線確保安全
5. 更換損壞的加熱線圈

Solutions： 1. Stop using immediately to avoid electric shock hazard
2. Professional technicians inspect leakage points on-site
3. Replace damaged power cord or circuit board
4. Reconnect grounding wire to ensure safety
5. Replace damaged heating coil

故障原因： 1. 電源插座接觸不良或損壞
2. 保險絲燒斷
3. 電源板故障
4. 主板芯片損壞
5. 電源開關失靈

Fault Causes： 1. Poor contact or damaged power socket
2. Blown fuse
3. Power board failure
4. Damaged main board chip
5. Power switch failure

解決方案： 1. 更換電源插座測試是否正常
2. 更換燒斷的保險絲
3. 檢測電源板輸出電壓，更換故障元件
4. 維修或更換損壞的主板
5. 更換電源開關按鈕

Solutions： 1. Replace power socket to test functionality
2. Replace blown fuse
3. Test power board output voltage and replace faulty components
4. Repair or replace damaged main board
5. Replace power switch button

故障原因： 1. 按鍵面板進水或進油
2. 按鍵彈片氧化或損壞
3. 控制面板排線鬆動
4. 控制芯片故障

Fault Causes： 1. Water or oil ingress into button panel
2. Oxidation or damage of button shrapnel
3. Loose control panel cable
4. Control chip failure

解決方案： 1. 拆卸面板清潔進水/進油區域
2. 更換損壞的按鍵彈片
3. 重新插緊控制面板排線
4. 更換故障的控制芯片
5. 更換整個按鍵面板（如損壞嚴重）

Solutions： 1. Disassemble panel to clean water/oil ingress area
2. Replace damaged button shrapnel
3. Reconnect loose control panel cable
4. Replace faulty control chip
5. Replace entire button panel (if severely damaged)

故障原因： 1. 風機葉片被異物卡住
2. 風機馬達燒毀
3. 溫度傳感器故障
4. 散熱不良導致過熱報警
5. HI代碼/報警聲音提示故障

Fault Causes： 1. Fan blades stuck by foreign objects
2. Burned fan motor
3. Temperature sensor failure
4. Overheating alarm due to poor heat dissipation
5. HI code/alarm sound indicating fault

解決方案： 1. 清理風機異物確保運轉順暢
2. 更換損壞的風機馬達
3. 更換故障的溫度傳感器
4. 清理散熱器灰塵改善散熱
5. 檢測電路板解決HI代碼故障

Solutions： 1. Clean fan foreign objects to ensure smooth operation
2. Replace damaged fan motor
3. Replace faulty temperature sensor
4. Clean radiator dust to improve heat dissipation
5. Test circuit board to resolve HI code fault

故障原因： 1. 高溫狀態下驟冷導致破裂
2. 重物撞擊面板
3. 面板老化產生裂紋
4. 安裝不當導致受力不均

Fault Causes： 1. Cracking due to sudden cooling at high temperature
2. Heavy object impact on panel
3. Panel aging causing cracks
4. Uneven stress due to improper installation

解決方案： 1. 根據電磁爐型號配備原廠/兼容玻璃面板
2. 專業技師上門更換，確保密封防水
3. 檢測內部線路是否受損
4. 更換後測試加熱功能是否正常
5. 提供面板保護建議避免再次損壞

Solutions： 1. Equip original/compatible glass panel according to induction cooker model
2. Professional technicians replace on-site to ensure sealing and waterproofing
3. Test internal wiring for damage
4. Test heating function after replacement
5. Provide panel protection advice to avoid re-damage