I am a technical engineer who repairs commercial vacuums and sealers. Today I would like to share with you my experience working at Junhong Electrical Maintenance Company and some maintenance insights.
As a maintenance engineer, we are exposed to a variety of machine failures every day. Commercial vacuum machines and sealing machines are very important equipment for many companies. Once problems occur, they will directly affect production and efficiency. Therefore, our maintenance personnel need to have solid professional knowledge and rich practical experience to quickly locate and solve faults.
First of all, the problem we often encounter is that the vacuum speed of commercial vacuum machines slows down or cannot vacuum. This may be caused by a failure of the vacuum pump, so we need to carefully check whether the pump motor and seals are intact and whether there is any air leakage. In addition, you also need to check the sealing of the vacuum chamber to ensure that there is no air leakage.
Secondly, there are many reasons for problems with the sealing machine. The most common problem is that the seal is not firm, causing air leakage or deterioration of the product. This problem is usually caused by the temperature of the sealing machine not being high enough or the sealing time not being long enough. We need to adjust the temperature and time of the sealing machine according to different products and bag materials to ensure sealing quality. In addition, you also need to check whether the heater and pressurer of the sealing machine are working properly and whether they need to be replaced.
In addition to common faults and solutions, as a maintenance engineer, I have also accumulated some personal opinions. First of all, repair work is a job that requires patience and care. Sometimes, a small detail can be the key to solving a problem. Therefore, we must pay attention and attention to every detail and not be careless.
Secondly, communication and communication are important aspects in solving problems. During the maintenance process, we often need to communicate with customers to understand the usage of the machine and the specific manifestations of the problem. Only through effective communication can we better locate and resolve faults. At the same time, we also need to maintain good collaboration and communication with colleagues to solve complex problems together.
Finally, what I want to say is that as a maintenance engineer, we cannot just stay at the maintenance level, but also need to constantly learn and improve our technical level. With the development of science and technology and the replacement of machines, maintenance work is also constantly changing and innovating. Only by constantly learning and adapting to new technologies can we better provide customers with high-quality maintenance services.
I gained a lot from my working experience at Junhong Electrical Maintenance Company, which not only improved my technical level, but also cultivated my problem-solving ability and patience. I will continue to work hard to provide customers with better repair services and ensure that everything about their equipment is running properly.
If you are using a commercial vacuum and sealer